Pressure Treated Pent
Pressure treated timber is timber that has been penetrated with wood preservative to enhance protection in terms or the prevention of rot, decay and insect and fungal attack. Pressure treated timber is not waterproof and is recommended that the use of a water repellent or weatherproof coating to facilitate the protection from water penetration and moisture build up.
Our Pressure treated pent has 50mm x 50mm framing, a single 2''6' door with 5 different position options, 1 opening window as standard.
Guttering and downpipe
EPDM Rubber Roofing
Depth x Width
6' x 8'
6' x 10'
6' x 12'
8' x 8'
8' x 10'
8' x 12'
8' x 16'
Please note - all dimensions are nominal
Floor and roof are constructed using 19mm x 125mm Matchboard Tongue & Groove boarding.
Sides are constructed using 25mm x 125mm V-Rebated Cladding .
All side and roof framework smooth planed timber with rounded edges 50mm x 50mm.
All buildings supplied with a floor. Excluding greenhouses.
Floor joists spaced at no more than 300mm centres forming a sturdy and strong base.
All shed and workshop doors are fitted with three hinges per door and supplied with a pad bolt and fittings.
Glazing supplied with 3 mm toughened glass to all windows and retained with glazing beads.
Window size 460mm x 610mm. Excluding the Security Apex which is 460mm x 140mm.
Supplied pre-treated internally and externally with a factory base coat using a high-quality water-based anti-fungicide wood treatment in a light oak colour.
Heavy duty poly mineral roofing felt is supplied with each building.
Timber sourced from FSC or similar Approved Sources.
Contact us and we will be happy to help you with any questions you might have